FingerTech Flat Bearing Motor Mount (pair)

Give your 16mm Spark Motors some outboard ball bearing shaft support while providing a simple way to mount them to a wall panel!

Specifications:
- Height: 22.23mm (0.875in)
- Width: 22.23mm (0.875in)
- Thickness: 1.63mm (0.06in)
- Weight: 1.5grams (0.05oz) each. 3mm Flanged Bearings add 0.33grams (0.01oz) each.
- Chassis Mounting: Four countersunk 3.45mm (0.14in) holes spaced on a 15.88mm (0.625in) square for as large as 6-32 screws
- Motor Mounting: Eight radial 2.44mm holes match the 11mm spaced 2-56 screw pattern on Spark Motors
- Optionally includes two 3mm shielded flanged ball bearings

Requires:
To mount Spark Motors, use 2-56 x 1/8" screws.
To fasten mounts, use countersunk 4-40 screws for threaded chassis holes, or #4 Plastite screws for plastic chassis walls.

Viper:
Add some extra support to your Viper's drive motors! Fasten the Flat Bearing Mounts to the outside of the Viper chassis using 3/16in long 2-56 screws.