F2822-1100KV Brushless Outrunner - 4mm shaft

Price: 27.03CAD

18.96 USD 16.97 EUR

In Stock: 182

• We've custom-upgraded the popular F2822-1100KV Brushless Outrunner to have a 4mm thick shaft! That's 60% more material than the 3.175mm shafts, meaning far less chance of the motor shaft breaking!
• Also now includes the 7 screws necessary to mount to the top and bottom motor faces.
• This is the motor used in the Viper Vertical and Horizontal Spinner Add-Ons (after June 2020). Its size and power make it ideal for antweight robot weapons.

Description
CAD Files
Reviews
Related

This F2822-1100KV Brushless Outrunner is what we use in the Viper Vertical and Horizontal Spinner Add-Ons (after June 2020). Its size and power make it ideal for antweight robot weapons.

Specifications:
KV: 1100rpm/V
RPM @ 2S: 8140rpm
RPM @ 3S: 12,210rpm
Max Voltage: 7.2V-11.1V (2S-3S)
Max Watts: 102W
Max Current: 9.9A
Max Resistance: 0.192Ω
Stall Torque: Notes about Brushless Motor Torque

Weight: 43g (1.52oz)
Motor Diameter: 27.8mm (1.09in)
Motor Length: 21.35mm (0.84in). 25.66mm (1.01in) to end of hub extension.
Wire Length: 56mm (2.2in)
Plug Type: 3.5mm female bullet connectors
Shaft Material: SUS420 Stainless Steel, 50HRC
Shaft Diameter: 4mm (0.157in)
Shaft Length: 10mm (0.39in)

Mounting Holes:
- Two M3 holes spaced 16mm (0.63in), two M3 spaced 19mm (0.75in), 90degrees offset. Four M3 x 5mm Phillips screws included.
- The rotating portion of the motor has three M2 screw holes spaced evenly on a 12mm circle. Three M2 x 12mm Phillips screws included.
Wiring: Connect the three ESC wires any way you like. If the motor is spinning backwards, swap any two wires.

D282217.STEP (3.175mm shaft version)

1 Product Reviews - Average rating 4 / 5 (Show All)

Amazing for a while

austin hill - 29th July 2022

It worked so well it was amazing so powerful was so excited then for some reason it seized up and jitters and wont move at all I changed the esc and battery and it still jitters. I tried to spin it by hand and it is definitely seized up.
[FTR: Is there anything in the bearings? Did one of the wires get damaged? Email support and we'll get you going.]

FingerTech Blade Mount - 13.06CAD

Use our Blade Mount to attach a blade or pulley directly to a F28xx brushless outrunner motor.

• Fits over the shaft and hub of a F28xx motor. Uses three M2x12mm countersunk screws to mount solidly against the motor body.

• Four 6-32 threaded holes follow the mounting pattern for all of our spinner blades!

20A BLHeli Brushless Speed Controller - 20.72CAD

• 20A Brushless Speed Controller.
• Replacement for the Viper Vertical or Horizontal Spinner Add-Ons.

Product Highlights:

We don't currently have that one in stock

F2822-1100KV Brushless Outrunner - 4mm shaft