These hubs work much better than the snap hubs, thank you Finger Tech for redesigning the hubs!

These hubs take massive hits. I've used them for two competitions now, and at Moto 2020 they took hits from a horizontal spinner, and stayed on after getting bent in half. It was actually difficult to get them off after they got hit. The wheels never budged. Great product! Thank you!

My kid's bot had the entire axle of the drive motor get torn off and the hub and tire was still attached to the broken axle. After the fight, the hub had a big scratch but was still perfectly using for the next fight.

All robots should use the finger tech foam wheels and twist hubs. I use these wheels in all my antweights. It would be nice to have a version of these wheels with a plastic hub to make the accessible to fairyweights.

The ring makes sure the wheel is never coming off the hub and they hold the wheel pretty well even without the ring on. Twisting the ring on is not the easiest thing to do especially for kids but it helps if the motor can come out of the robot with the wheel on. The biggest issue is the weight. The metal hubs don't add much durability wise because if they get hit, the motor shaft will probably bend or break anyway so the added weight of them being metal does not help.