FingerTech Mini Terminal Block (pair)

Price: 7.21 CAD
5.15 USD 4.87 EUR
In Stock: 330

• When you don't want to solder every wire connection, these push-wire terminal blocks are a convenient solution.
• Easily connect and disconnect up to four 18ga wires to a common connection point.
• Includes one red and one black terminal block for positive and negative (ground) connections.


-
+
  • Description
  • Reviews

When you don't want to solder every wire connection, these push-wire terminal blocks are a convenient solution.
Easily connect and disconnect up to four wires to a common connection point.
Includes one red and one black terminal block for positive and negative (ground) connections.

Specifications:
Includes one red and one black push-wire 4-terminal block.
Material: Glass-filled nylon, 0.20m Beryllium Copper retainer tabs
Dimensions (each): 10.6 x 9.8 x 5.8mm (0.42 x 0.39 x 0.23in)
Weight (each): 0.7grams (0.025oz)
Accepts wire size: 18-24gauge solid or stranded wire (up to 1mm diameter). Larger wires can be used by trimming away enough strands to fit.
Continuous Current: 6A (forever). Max current is 30A burst.

Installation:
1. Strip insulation back 4-5mm (0.15-0.2in).
2. Twist stranded wires before insertion. Tinning with solder is recommended.
3. Push wire into one of four holes until stop is reached.
4. To release a wire from the terminal block, push a thin flat tool into the slot above the wire to free it.

Installation and removal diagram







5 Product Reviews - Average rating 4.4 / 5 (Show All)
Simplifies wiring drastically
- 05th May 2024
I've been using these in my beetleweight for a handful of events now and they have been working great, winning the last four events including the Canadian Nats. Running off of the terminal blocks are Repeat Robotics Viper motors controlled by Wasp ESCs. Changing out components has never been easier.
not as simple as advertised
- 12th March 2023
It seems like we always have some difficulty getting wires, particularly black wires, to stick in without many many tries. [FTR - make sure the wires have been tinned. Loose stranded wire will buckle when you try to push it in.]
Quick & easy alternative to solder!
- 02nd January 2018
Before ordering, I had intended to solder all connections in my Viper kit.

However, after using this terminal block, I don't feel that soldering is necessary at all in this kit.

Super easy to install, clean, stylish--very attractive, especially for a small project or one that will require frequent disconnecting/connecting wires.
Quick and easy, although sometimes a bit finicky
- 24th February 2015
I was tired of soldering together every single wire on my robot and having to de-and re-solder every wire together every time a motor fried or a wire got cut on an edge. The Mini Terminal blocks held up great despite getting tossed around an arena by two spinners and still make it easy to swap wires at the end of a match to replace anything that fried. While I wouldn't recommend using them for brushless distribution, they held up great to running 2 Silver Sparks worth of stall.

I had some small problem with actually getting a few wires in, but they tended to be high strand count or of low quality. Even then there were a few that half-engaged and then promptly pulled out as I flipped the wiring harness around. A few of the terminals I had to open with a razor blade, then push the wire in and pull the razor out just to get them to stay. Make sure to tug on your wires after you get them in to make sure you didn't only half-grab the wire! [FTR: multi-strand wires can be tinned first - they will stay in better!]
Simple & reliable!
- 27th March 2013
I installed a pair of these in my antweight for an event this past weekend, they performed admirably! Never had any wires come loose despite being tossed around the arena like crazy.

Product Highlights: