• Softens and increases the natural adhesion of foam tires for maximum traction.
• 4 oz. bottle

• Bore: 4mm (0.16in)
• Belt Diameter: 13.6mm (0.53in)
• Width: 7mm (0.28in)
• Tighten this center pulley onto a motor shaft with the setscrew built into the hub.

• Bore: 5mm (0.19in)
• Belt Diameter: 13.4mm (0.53in)
• Width: 7mm (0.28in)

• Bore: 4mm (0.16in)
• Belt Diameter: 14.4mm (0.57in)
• Width: 6mm (0.23in)
• Tighten this center pulley onto a motor shaft with the setscrew built into the hub.

• Bore: 4mm (0.16in)
• Belt Diameter: 14.4mm (0.57in)
• Width: 10mm (0.39in)

• Bore: 5mm (0.20in)
• Belt Diameter: 16.5mm (0.65in)
• Width: 8.8mm (0.35in)

• 2-Pin JST-style female connector.
• 20 gauge wires.

• 2-Pin JST-style connectors
• Male and female connectors.
• Wires are 24 gauge and pre-tinned at ends for easy soldering.

• Bore: 5mm (0.20in)
• Belt Diameter: 18.2mm (0.72in)
• Width: 9.5mm (0.38in)

• Bore: 8mm (5/16in)
• Belt Diameter: 30mm (1.18in)
• Width: 7.3mm (0.29in)

• Bore: 8mm (5/16in)
• Belt Diameter: 35mm (1.375in)
• Width: 7.6mm (0.34in)

• 54:1 Reduction gearmotor with FF-050 motor.
• 278rpm.
• 3.6kg-cm (50oz-in) torque.
• Only 32grams (1.1oz).

• Clear your toolbox of all those patch cables!
• Simply plug the banana plugs into your battery charger, and your battery into one of the five output connectors.
• Choose from Servo style, Deans Ultra, JST, and 2mm and 2.5mm barrel plugs.
• Also includes a loop of wire for splicing in two of your own connectors.
• All connectors are gold plated for optimal connections.
• Comes with caps for unused connectors to prevent contact with live ends.

• Mini-sized servo.
• Metal gears for super high torque.
• 2.9kg-cm (40.27oz-in) @ 6V
• Only 18.8grams (0.66oz).

• Very low-resistance.
• The Deans design eliminates the possibility of reverse polarity connections.
• Provides a secure connection for battery and motor connections on R/C vehicles.