• This bearing block can be used as a motor mount for 16mm gearmotors (such as our Spark motors) or as a simple bearing block for a 3mm shaft.
• The bearing works with the Spark Motors by aligning the mounting holes to the Spark mounting holes and offers additional shaft support.

New sizes and colors!

• Garolite makes excellent baseplate and top cover material for robot construction.  It is easily machined.
• Now available in:
- Two sheet sizes (8x10", 16x10")
- Three thicknesses (1/16", 3/32", 1/8")
- and Six colors!
 

• One pair of 3mm ID chrome steel double-sealed ball bearings.
• If you robot has to take a lot of abuse - landing hard on the wheels, etc - these 3mm ball bearings are perfect for distributing the force into the frame.
• Made to fit the shaft of Spark motors, or any other motor with a 3mm shaft.

• Includes two 2-56 Button Head Screws (length of 1/8", 3/16" or 1/4")
• Black Oxide screws are harder than Stainless Steel or Zinc Plated and the heads will not strip out as easily.
• Use for mounting Gold Spark and Silver Spark motors.
• These screws require a 0.050" hex wrench

• Includes 25pcs 4-40 Flat Head Screws (length of 1/4", 3/8" or 1/2")
• Black Oxide screws are harder than Stainless Steel or Zinc Plated and the heads will not strip out as easily.
• Use for mounting Bearing Blocks.
• These screws require a 1/16" hex wrench

• Includes 25pcs 4-40 Button Head Screws (length of 1/4", 3/8" or 1/2")
• Black Oxide screws are harder than Stainless Steel or Zinc Plated and the heads will not strip out as easily.
• Use for mounting Bearing Blocks.
• These screws require a 1/16" hex wrench

• Hex Wrench (aka Allen Key)
• Used for various screws and setscrews (see details)