• 54:1 Reduction gearmotor with FF-050 motor.
• 278rpm.
• 3.6kg-cm (50oz-in) torque.
• Only 32grams (1.1oz).

• Bore: 8mm (5/16in)
• Belt Diameter: 35mm (1.375in)
• Width: 7.6mm (0.34in)

• Bore: 8mm (5/16in)
• Belt Diameter: 30mm (1.18in)
• Width: 7.3mm (0.29in)

• Voltage: 6Vdc
• 17:1 planetary gearbox
• All metal gears
• Only 28grams (1oz)

• Bore: 5mm (0.20in)
• Belt Diameter: 18.2mm (0.72in)
• Width: 9.5mm (0.38in)

Now in Stock!

• Lite Hubs press into Lite Flite and Lectra Lite wheels, providing a secure and very lightweight method of mounting a wheel onto a motor shaft.

• Bore diameter: 3mm
• Can be drilled out for 1/8" motor shafts.
• Includes two Lite Hubs, four 4-40 setscrews and one 0.050" allen wrench.
• Weight: <1gram per pair

• Bore: 5mm (0.20in)
• Belt Diameter: 16.5mm (0.65in)
• Width: 8.8mm (0.35in)

• Low-Bounce, Non-Treaded Foam Tire
• 5/32" (3.97mm) bores accommodate 1/8" axles, but can be drilled out for 3/16" axles.
• Diameters from 1.5" - 3.0"
 

• Bore: 4mm (0.16in)
• Belt Diameter: 14.4mm (0.57in)
• Width: 10mm (0.39in)

• Similar to Lite Flites at half the width.
• 5/32" (3.97mm) bores accommodate 1/8" axles, but can be drilled out for 3/16" axles.
• Diameters from 1.75" - 2.25"
 

• Mini-sized servo.
• Metal gears for super high torque.
• 2.9kg-cm (40.27oz-in) @ 6V
• Only 18.8grams (0.66oz).

• Standard-sized servo.
• Metal gears for super high torque.
• 12kg-cm (166oz-in) @ 4.8V
• Only 56grams (1.98oz).

• Bore: 5mm (0.19in)
• Belt Diameter: 13.4mm (0.53in)
• Width: 7mm (0.28in)

• Bore: 4mm (0.16in)
• Belt Diameter: 14.4mm (0.57in)
• Width: 6mm (0.23in)
• Tighten this center pulley onto a motor shaft with the setscrew built into the hub.

• Bore: 4mm (0.16in)
• Belt Diameter: 13.6mm (0.53in)
• Width: 7mm (0.28in)
• Tighten this center pulley onto a motor shaft with the setscrew built into the hub.