Input: 4.8V - 9V (we have run them at 11V, but be careful because any higher will destroy the circuit board.  We do not recommend 3-cell lipo operation.)
If your robot's battery is higher than 9V, simply run the servo power from a 9V regulator.
Type: Digital - 125 degrees of rotation, can be modified for continuous rotation
Dimensions: 40mm x 38mm x 20mm (1.57" x 1.50" x 0.79")
Weight: 56g (1.98oz)
Gears: All metal
Accepts Futaba-splined servo arms.  If the servo will be taking impacts, consider a Servo Saver to protect the gears!

Speed: Stall torque: Idle Current: Average Current: Stall Current:

Performance at 4.8V: 0.17sec/60degrees 10kg-cm (139oz-in) under 20mA 0.65A 1.3A

Performance at 6.0V: 0.13sec/60degrees 12.5kg-cm (173oz-in) under 20mA 0.8A 1.6A

Performance at 7.4V: 0.11sec/60degrees 15.4kg-cm (214oz-in) under 20mA 1.0A 2.0A

Performance at 9.0V: 0.09sec/60degrees 18kg-cm (250oz-in) under 20mA 1.2A 2.4A